Art 36786

€ 418.34
per unit
-
+
Adaptable to

BATTERY CHARGER DOCTOR CHARGE 50

carica batterie DOCTOR CHARGE 50
BATTERY CHARGER DOCTOR CHARGE 50

Description

FEATURES:
Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, PbCa, EFB und Li batteries at 6/12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises.
The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers.
The Pulse Tronic technology guarantees optimal battery charging over 8 phases.
Doctor Charge 50 carries out 5 functions:
1. automatic charge and maintenance of batteries with PULSE TRONIC technology, even in diffi cult environmental conditions (low temperatures);
2. battery tests such as voltage at terminals, starting capacity and operational check of the vehicle alternator;
3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration;
4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational;
5. vehicles start aid.
Based on the SMPS (Switch Mode Power Supply) Technology.
In case of black-outs or repetitive uses Doctor Charge 50 can set itself at the last settings carried out, furthermore the cables can be calibrated according to their type (different lengths and/or  ections).
Many protections available.
Fit with PFC device.

Caratteristiche Tecniche

WET Batteries: Lead-Antimony (PbSn) or Lead-Calcium (PbCa) or Lead Calcium-Silver (PbCaAg) batteries with liquid electrolyte.
GEL Batteries: Lead-Calcium batteries (PbCa) with solid gelatinous electrolyte. Given that these batteries are completely sealed. Maintenance free.
AGM Batteries: These are solid (starved) electrolyte lead-calcium (PbCa) batteries. They are completely sealed. Maintenance-free.

AUTOMATIC CONTROL OF CHARGE PROCESS

  • Regenerates sulphated batteries
  • Automatic control of the charging process
  • Spark-free reverse polarity and short circuit control
  • Batteries last longer

 

Data

Voltage 230V 1ph
Frequency 50/60 Hz
weight 3,7 kg
Power absorbed in charge 600 W
Charging voltage 6/12/24 V
Effective charging current 45/45/23 A
Charging current EN60335-2-29 40/40/20 A
Minimum reference nominal capacity 10 Ah
Maximum reference nominal capacity 600 Ah
Adjustment positions 7
Dimensions 330x100x160 mm
net weight 4.076 kg
Description: FEATURES: Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, PbCa, EFB und Li …
Characteristics: WET Batteries: Lead-Antimony (PbSn) or Lead-Calcium (PbCa) or Lead Calcium-Silver (PbCaAg) batteries…