STANDARD DRY CHARGED BATTERIES

ACTIVATION OF DRY CHARGED BATTERIES:
STRICTLY COMPLY WITH THE INSTRUCTIONS GIVEN BELOW TO ACTIVATE A DRY BATTERY:
• REMOVE THE CAPS.
• POUR IN THE ELECTROLYTE. MAKE SURE THAT THE LEVEL IN EACH ELEMENT IS ABOUT 5 MM HIGHER THAN THE EDGE OF THE SEPARATORS (USE A CLEAN PLASTIC FUNNEL).
• ALLOW TO STAND FOR ABOUT ONE HOUR SO THAT THE ACID CAN BE EVENLY ABSORBED BY THE PLATES.
• CHARGE THE BATTERY AT A CURRENT INTENSITY (IN AMPERES) EQUAL TO ONE TENTH OF THE NUMBER THAT INDICATES THE BATTERY CAPACITY.
• TOP UP THE LEVEL.
• SCREW THE CAPS FIRMLY BACK IN PLACE, THEN WASH AND DRY.
Product Date Purchase
Standard 12V battery - ENERGECO
35428 Standard 12V battery - ENERGECO
Length 187 mm
Width 128 mm
Height 167 mm
Quantity of acid 1,9 l
Capacity 24 Ah
Inrush 180 A
net weight 5.5 kg
€ 134.20 per unit
Standard 12V battery - ENERGECO
35855 Standard 12V battery - ENERGECO
length 187 mm
width 128 mm
height 167 mm
capacity 24 Ah
inrush 180 A
quantity of acid 1,9 l
net weight 5.5 kg
€ 134.20 per unit
Standard 12V battery - ENERGECO
35330 Standard 12V battery - ENERGECO
length 233 mm
width 131 mm
height 167 mm
capacity 32 Ah
inrush 220 A
quantity of acid 2,5 l
net weight 7 kg
€ 143.79 per unit