HIGH-STRENGTH LOCKING FLUID - 50 ML

Opis

Locking of cylindrical parts not intended for disassembly: bearings, gears, pulleys, cylinder sleeves, bushings, plain bearings, pins, keys, studs.

Fluid product allowing free-sliding assembly as an alternative to interference fit.
In interference fit assembly, increases joint strength by approximately four times.
Ensures a perfectly distributed load across the engaged surface.
Eliminates internal stresses within the joint, protecting it from contact corrosion.
Permanent locking.
Can also be used on threaded parts, acting as a very strong threadlocker.
High resistance to water, oils, fuels, hydraulic and refrigeration fluids, gases, and vapors.
Tested according to DIN 54452 standards.
Operating temperature: -55°C to +150°C.
Maximum diametral clearance: 0.1 mm.
Storage at room temperature: minimum 18 months.

Podatki

artikel arexons 4713

format 50 ml

uporaba Bloccaggio di parti cilindriche non soggette a smontaggio: cuscinetti, ingranaggi, pulegge, camice, boccole, bronzine, spine, chievette, za ni.

neto teža 0.08 kg